Is Solid or Engineered Hardwood Flooring Best for Your Home?

Wall-to-wall carpeting is mundane and gives a room a soft, fuzzy appearance. The material adds little to no character to the space and is not easy maintenance. Hardwood flooring, on the other hand, gives a room a warm and bright glow. Wood grains contrast from the furniture and give the space a distinct character. From light to dark wood to species with varying grain, hardwood flooring contributes just as much to the room as the walls and furniture. If adding wood to your home seems like a risk, here is some basic information about hardwood flooring.

Hardwood flooring is sold in solid and engineered varieties for nearly all species. Made fully out of wood, both types give your home the look of hardwood, but engineered flooring can be placed in more locations where moisture can be an issue.

Solid hardwood flooring is cut directly from a wood log into a solid plank, and tongues and grooves are added to all four sides. For installation purposes, solid flooring is 5/16ths to 3/4ths of an inch thick and should be nailed down over a wood-type subfloo. Solid hardwood, however, is sensitive to changes in humidity, and if you decide to add any solid species to your home, locations at or above the ground floor are ideal. Solid should not be added over a radiating heat source or over concrete unless it is a rift and quartered or shorts product.

Engineered flooring is also 100-percent hardwood but can be used in more places and has a different composition. Three to nine thin wood plys bonded together through heat and pressure make up a piece of engineered hardwood flooring. The engineered wood is more dimensionally stable and can be installed at or below ground level in a dry space. Engineered flooring can withstand dry basements and being placed over concrete slabs or a radiating heat source without warping.

Erik Taylor Wins BMES Graduate Student Award

At the annual meeting of the Biomedical Engineering Society, Brown University graduate student Erik Taylor won the Graduate Student Extended Abstract Award for outstanding research. His submission, “Superparamagnetic Iron Oxide Nanoparticles Could Be Better than Antibiotics at Reducing Biofilm Produced by Staphylococcus Aureus” was considered by the committee strong enough to be only one of ten such awards presented.

This award consists of a certificate, a stipend of $500, and complimentary registration for the 2011 BMES Annual Meeting. The certificate was presented at the awards ceremony at the BMES Business Meeting on Thursday, October 13, 2011, in Hartford, Conn. The award has been presented each year since 1992 in recognition of outstanding biomedical engineering research.

Taylor, who was selected for a Fulbright Fellowship, will be leaving for India next semester to work on biofilm research and anti-infection strategies at IIT-Bombay in Mumbai for nine months. He will be working with Dr. Rinti Banerjee from IIT-Bombay through the Indo-U.S. Center for Biomaterials for Healthcare, co-directed by professors Bikram Basu and Thomas Webster.


Brown University and University of Rhode Island Team Wins $6.17 Million DOE EPSCoR grant

Brown University and University of Rhode Island researchers led by principal investigator Pradeep R. Guduru, James R. Rice Associate Professor of Engineering at Brown, have won a three-year, $6.17 million grant from the Department of Energy (DOE) Experimental Program to Stimulate Competitive Research (EPSCoR). The project, “Fundamental Investigations of Mechanical and Chemical Degradation Mechanisms in Lithium Ion Battery Materials” will also involve Brown professors Allan Bower and Vivek Shenoy from the School of Engineering and Li-Qiong Wang from the Department of Chemistry; and Professors Brett Lucht, William Euler and Arijit Bose from the University of Rhode Island.
Electron microscopy images of the phase boundary between crystalline
silicon and amorphous lithiated silicon, revealing its atomic structure.
The sharp jumps in stress, composition and atomic structure across the
phase boundary play an important role in determining the mechanical
damage that results in silicon crystals during the initial charge cycle.

“This award represents a truly interdisciplinary research effort that brings together solid mechanics, chemistry and materials science,” said Guduru. “The research effort presents an opportunity for Brown and URI researchers to contribute to a technological area of national importance and forge strong collaborations with national labs and industry.”

“This new award contributes to the growing portfolio of engineering research at Brown in the energy and nanoscience fields,” said Dean Larry Larson. “These new fields are changing the way we live in thousands of different ways. Congratulations to all the faculty, post-docs, staff and students involved in these successful efforts.”

Electron microscopy images of the phase boundary between crystalline
silicon and amorphous lithiated silicon, revealing its atomic structure.
The sharp jumps in stress, composition and atomic structure across the
phase boundary play an important role in determining the mechanical
damage that results in silicon crystals during the initial charge cycle.



Despite the rapid advances in lithium ion battery (LIB) technology in recent years, major obstacles remain for vehicular applications of LIBs. It is widely recognized that further critical breakthroughs in the science and technology of lithium ion battery materials are necessary to develop the next generation of low-cost, long-life, higher energy density batteries for extended range electric vehicles.

The objective of the reserach funded under the DOE EPSCoR grant is to establish a comprehensive research program at Brown University and University of Rhode Island to develop fundamental and quantitative understanding of degradation mechanisms that limit the performance and cycle life of LIBs; and use the insights gained to help develop materials and architectures with significantly improved performance.

The research program encompasses critical challenges in the three major battery components: anodes, electrolytes and cathodes. Mechanical and chemical degradation of electrodes associated with large volume changes during charging and discharging is a critical factor that limits their capacity and lifetime. However, the degradation mechanisms are not well-understood quantitatively, which is a critical obstacle in developing the next generation of LIBs. The research team will address the fundamental issues of mechanical behavior & performance, controlling electrochemical side-reactions, formation and stability of solid-electrolyte interphase (SEI) layers. Through a combined experimental and computational approach, the team plans to develop the necessary quantitative understanding, which can help make battery materials design a well-controlled, principle-based process with predictable outcomes, in contrast to the largely trial and error based empirical approach being followed currently. The PIs will work with collaborators in national laboratories and battery industry in addressing the relevant problems of highest impact for developing the next generation of higher energy density battery systems.

 
Copyright © space engineering. All Rights Reserved.
Blogger Template designed by Big Homes.